(7)Steel pipes and other overlength parts that can not be packed inside the boxes can be packed by stacking orderly and regularly on a pallet for the convenience of transporting with forklifts and other vehicles.The stacks must be strapped and fixed with steel bands every two meters or so to prevent the steel pipe stacks from getting loose and collapse.
6.Easy and speedy installation with no need for on-the-spot processing
As the products involved in the gas fire extinguishing system product“Belt and Road”exporting project(also called gas fire extinguishing system exporting project,or gas fire extinguishing system exporting,or gas fire extinguishing equipment exporting for short)are to be installed abroad,where conditions mostly do not allow to perform on-the-spot processing,it is required that all the parts and components should finish processing before being delivered and it is not allowed to conduct secondary processing on the installation site.It is advised to make the starting pipes between the starting devices and the cylinder groups of the fire extinguishing systems with the relatively costly stainless steel flexible metal pipes instead of the lower-cost DN4~6mm copper pipes that are used now by most domestic manufacturers in China,because if DN4~6mm copper pipes are used,we have to tailor,cut,bend and enlarge the opening of the copper pipes on-site using special tools and according to the actual conditions before being able to start the pipes.The on-site installation technical workers also need special training and practices before being able the do the work.If we replace the DN4~6mm copper pipes with stainless steel metal pipes,no on-site processing will be needed anymore.(So far,Beijing Leader Haixin is the only company in China to apply this method and“Customer Centricity”is the principle of this company).Although it increases some cost for the manufacturer,it avoids the hassle of on-site processing if copper pipes are used and realizes zero on-the-spot processing for the system,lowering the professional and technical demand for the installation workers and making the installation simpler,faster and more convenient,raising the installation efficiency by more than four times,greatly reducing the installation cost and ensuring more reliable sealing performance of the starting pipes of the fire extinguishing system.
7.Installation can be performed according to provided materials and drawings without the need for on-site instruction by technicians sent by the manufacturer
As the installations of the gas fire extinguishing system product“Belt and Road exporting project(also called gas fire extinguishing system exporting project,or gas fire extinguishing system exporting,or gas fire extinguishing equipment exporting for short)are made in foreign countries,it is better that installations can be done according to the provided materials and drawings,without the need of on-site instructions by technicians sent by the manufacturer to save the time for installation and costs of sending people abroad.The gas fire extinguishing system product exporting project(also called the gas fire extinguishing system exporting project,or gas fire extinguishing system exporting or gas fire extinguishing equipment exporting for short)should prepare detailed system installation and cylinder group room equipment installation drawings for each and every project.It is advised to perform actual installation of the cylinder group room equipment inside the manufacturing plant before delivering the products,video-record and take photos of the installation process and make special slides according to the order of the installation.These documents and drawings will be provided to the users along with the products,and make sure that users can assemble the parts and components of the fire extinguishing system very easily like children build blocks according to drawings,and the manufacturer will not need to send technicians to provide on-site instructions.If there is still any problem,they can communicate with the manufacturer through WeChat,real-time video and telephone conversation to solve the difficulties.
8.Responsibilities of the dealers
With the above,we have elaborated to the manufacturers the main technical requirements and measures to ensure safety,sealing and fire extinguishing performance of the gas fire extinguishing system product“Belt and Road”projects.Cheating in the quality and quantity of gas fire extinguishing system products and fire extinguishing agents can be the behavior of the manufacturers.Sometimes,it is done under the requirement of the dealers(engineering service providers).On other occasions,it is done independently by the dealers(engineering service providers).We urge that all parties must discipline themselves and users and dealers should choose brand name products from manufacturers with good reputations.We hope that the Changchun Changsheng vaccine incident never happens to gas fire extinguishing product manufacturers and dealers(engineering service providers),or in the fire protection sector.Hereinafter,I would like to elaborate on the responsibilities of the dealers.Currently,there are still some dealers and engineering service providers who know that some producers or manufacturers are producing unqualified products that threaten the personal and property safety of the people,yet they still continue to use those substandard products,thinking that even if any accident happens,the responsibilities are all on the producers or manufacturers that have legitimate production permits.According to the relevant laws and regulations of China and the relevant provisions in Chapter 3 Operator's Obligations of the Law of the People's Republic of China on the Protection of Consumer Rights and Interests,the operator shall ensure that the goods or services provided are in compliance with the requirements for the protection of personal and property safety.If it is found that the goods or services provided are defective,and there is a danger to personal or property safety,it shall immediately report to the relevant administrative department,stop selling,recall,and bear the necessary expenses arising from the product recall for the user or consumer.If any loss incurred by purchasing the illegal product from the operators by the user or the consumer,the operator may be required to pay compensation.
To ensure the personal and property safety of the people,users,dealers(engineering service providers)and production enterprises all have obligations to abide by the laws,do not use unqualified products or perform cheating,and do their respective contributions to protect the personal and property safety of the users or consumers,maintain social and economic order,and promote the healthy development of the market economy.
Finished on:Sep28,2023;Revised on:Oct18，2023
Author’s address:Beijing Leader Haixin Company,17 Rongjing Dongjie,Beijing Economic and Technological Development Area,Beijing
Note:The copyright of this article and its contents belongs to Zhu Jinwu.No organization or individual is allowed to hotlink or reprint without the author’s consent.In case of need to reprint or quote the article,please specify the author’s name and the name of his organization.Violators of the above will be held accountable according to the law.